24/7 EMERGENCY ELECTRICAL HELP

Emergency Electrician in London for Urgent Electrical Faults

Need urgent electrical help? RCD Electrical provides 24/7 emergency call-outs across London for power cuts, tripping circuits, burning smells and dangerous electrical faults.

EMERGENCY ELECTRICIAN IN LONDON

Urgent Electrical Help for Homes and Businesses

RCD Electrical responds to urgent electrical faults in homes, rental properties and commercial premises across London. We assess the problem, identify potential hazards and carry out safe, practical repairs to restore power where possible.

Service at a glance

Work covers

Urgent faults affecting wiring, circuits and electrical fittings

Suitable for

Homes, rental properties and business premises

Before work

Fault details, access and warning signs are confirmed

The repair depends on the fault found, the condition of the installation and the work agreed on site.

01 · Service overview

What an Emergency Electrician Can Help With

The service covers urgent electrical faults that may affect safety, power or the normal use of the property.

01

Power Loss

A sudden loss of power may affect one circuit, part of the property or the full installation.

02

Repeated Tripping

A circuit or protective device that keeps tripping may indicate a fault that needs diagnosis before it is reset again.

03

Heat, Burning Smells or Sparking

Burning smells, hot fittings, sparking or exposed wiring should be assessed without delay.

This page covers urgent electrical faults. For a non-urgent or intermittent problem, use our electrical fault finding and repair service.

02 · Urgent electrical faults

Electrical Faults That May Need an Emergency Call-Out

The right response depends on the warning signs, the affected circuit and whether the fault is active when you call.

01

Sudden Power Loss

Unexpected loss of power affecting part or all of the property.

02

Repeated Tripping

A circuit breaker, RCD or fuse that trips repeatedly after being reset.

03

Burning Smells

A burning smell from a socket, switch, fitting, consumer unit or wiring.

04

Hot Electrical Fittings

Sockets, switches, plugs or protective devices that feel unusually hot.

05

Sparking or Arcing

Visible sparks, crackling sounds or signs of arcing from fixed electrical equipment.

06

Damaged or Exposed Wiring

Loose, cut, burnt or exposed wiring that could present an immediate risk.

The warning signs affect the response

The Fault Must Be Assessed Before Repair

An intermittent or non-urgent problem may need electrical fault finding and repair. A damaged or outdated consumer unit or fuse box may need further assessment, while deteriorated wiring may require an electrical rewiring assessment.

03 · Property types

Emergency Electrical Help for Different Properties

The call-out is arranged around the type of property, the affected area, the occupants and the access available.

Home

Houses and Flats

Urgent faults can affect lighting, sockets, appliances, heating supplies or the full electrical installation.

Rental

Rental Properties

Landlords, tenants or managing agents can report the fault and provide access details for the affected property.

Work

Business Premises

Call-outs can be arranged around access, staff, customers and equipment affected by the electrical problem.

Shared

Communal and Shared Areas

Faults affecting shared lighting, supplies or fixed equipment can be assessed within the agreed access arrangements.

Call-out note

We confirm the fault, postcode, access and warning signs before arranging the call-out.


Shared and commercial areas may also need separate work for emergency lighting or fire alarm systems.
04 · How the call-out is arranged

What Happens During an Emergency Electrical Call-Out

We confirm the fault, assess the affected installation, make the area safe and explain the repair or further work required.

01

Confirm the Fault

We ask what happened, what has lost power and whether there is heat, damage, sparking or a burning smell.

02

Inspect the Affected Area

The electrician checks the relevant circuit, fittings, protective devices and accessible wiring.

03

Make the Area Safe

Unsafe circuits or equipment are isolated where required before the repair is discussed.

04

Repair, Test and Explain

The agreed repair is completed where possible, followed by relevant testing and a clear explanation of any further work.

Before the electrician arrives

Keep the Affected Area Accessible

Safe access to the consumer unit and affected area helps the electrician assess the fault without avoidable delay.

Tell us if the fault involves specialist fixed equipment. An EV charger or fixed air-conditioning electrical supply may need separate investigation. Data wiring and cabling should be reported separately if it is affected.
Additional Work Not Included Unless Agreed
05 · Immediate safety steps

What to Do Before the Electrician Arrives

Take only safe, practical steps. Do not touch damaged wiring, hot fittings or equipment that is sparking.

Clear

Keep Clear

Keep people away from the affected socket, switch, fitting, appliance or wiring.

RCD

Do Not Reset Repeatedly

Do not keep resetting a breaker or RCD that trips again immediately.

Water

Avoid Water

Do not touch electrical equipment if water is present around the affected area.

Fire

If You See Smoke or Fire

Leave the property, stay out and call 999. Do not try to tackle an electrical fire yourself.

Fault

Describe what happened and whether the fault is still active.

Access

Keep the consumer unit and affected area accessible where it is safe to do so.

Safety

Avoid contact with damaged fittings, exposed wiring or overheated equipment.

If the cause is not immediately clear

We Diagnose the Fault Before Repair

If testing identifies a separate fault or wider deterioration, we explain the issue before additional work is agreed.
06 · Call-out costs

How Emergency Electrician Call-Out Costs Are Assessed

The cost depends on the fault, access, time on site, testing, parts and any repair agreed after the initial assessment.

The fault is assessed first  Call with the postcode and fault details so the appropriate next step can be arranged.
Initial Call-Out

Quoted

For attendance, fault assessment and the first steps needed to make the affected area safe.

The cost depends on access, time on site and the fault found.

Assessment required

After Assessment

Fault Diagnosis and Repair

Quoted

For tracing the fault and completing the agreed repair where this can be done during the visit.

The circuit, wiring condition, parts and testing required affect the final cost.

Assessment required

Further Electrical Work

Quoted

For additional repair or replacement work identified after the urgent fault has been assessed.

The installation condition, access and parts required affect the final scope.

Assessment required

The cost may change if concealed damage, additional faults, restricted access or wider deterioration is identified. Any additional work is discussed before it begins.

07 · Why the service matters

Why Urgent Electrical Faults Should Be Checked Promptly

Sparking, heat, burning smells, repeated tripping and exposed wiring can indicate an active fault. The affected circuit should be assessed before the area is used again.

A breaker, RCD or fuse that trips again after being reset may be responding to a fault on the circuit or connected equipment.

Affected circuit

The electrician checks which circuit has failed and what equipment is connected to it.

Protective device

The breaker, RCD or fuse is checked as part of the fault assessment.

Further testing

Testing may be needed before the circuit can be returned to normal use.

Heat, discolouration, burning smells or buzzing may indicate a loose connection, damaged accessory or deteriorated wiring.

Damaged fittings

Cracked, loose or burnt fittings should not remain in use until they have been assessed.

Heat or discolouration

Heat, scorch marks or discolouration around an electrical point should be reported when you call.

Burning smell

A burning smell should be treated as an urgent warning sign, even if the circuit is still working.

Visible sparks, arcing or exposed conductors can present an immediate risk. Keep clear and report exactly what you can see.

Keep clear

Keep people and pets away from the affected electrical point.

Do not touch

Do not touch exposed wiring, damaged fittings or equipment that is sparking.

Report the signs

Tell us where the fault is, when it started and whether power has been lost.

The postcode, affected area, warning signs and access details help us understand the fault before the electrician attends.

Affected area

Tell us which rooms, circuits or equipment are affected.

Occupants and access

Tell us who can provide access and whether the property is occupied.

Essential equipment

Identify alarms, medical equipment, refrigeration or other essential supplies before isolation.

Report the fault clearly

Call and Describe the Electrical Warning Signs

Provide the postcode, affected area, warning signs and access details. We will use that information to arrange the appropriate next step.

Before you book

Details That Help Us Assess Your Emergency Call-Out

A clear description of the fault, warning signs and access arrangements helps us prepare before the electrician attends.

Describe What Happened

Tell us when the fault started, what has lost power and whether it is constant or intermittent.

Report the Warning Signs

Mention any burning smell, heat, noise, sparking, visible damage or exposed wiring.

Confirm Access and Essential Supplies

Tell us who can provide access and whether any alarms, appliances or essential equipment may be affected.

RCD-Electrical-Ltd-003
Emergency electrician guidance

Emergency Electrician Questions

Direct answers about urgent faults, warning signs, access, call-outs, repairs and costs in London.

An electrical emergency may include sparking, burning smells, hot fittings, exposed wiring, repeated tripping or a sudden loss of power where safety or normal use of the property is affected.

Repeated tripping may be caused by a fault on the circuit, damaged wiring or connected equipment. The cause should be diagnosed before the device is reset again.

A socket or switch that feels unusually hot, smells burnt, buzzes or shows discolouration should be checked promptly and should not remain in use.

The electrician will assess the fault and make the area safe. A repair may be completed during the visit where the cause is accessible and the required parts and time are available.

Access is normally needed to the consumer unit, the affected room or equipment and any nearby areas required for safe testing.

The immediate fault can be assessed first. If wider deterioration is found, we explain whether targeted repair or a separate rewiring assessment is needed.

Provide the postcode, affected area, warning signs, when the fault started, what has lost power and who can provide access.

Keep clear of the affected fitting and do not continue using it. Call with the location of the smell and any heat, noise or power loss you have noticed. If there is smoke or fire, leave the property and call 999.

Yes. Tell us whether the full property or only certain rooms and circuits have lost power, and whether neighbouring properties are also affected.

Keep away from the affected equipment or fitting, do not touch exposed parts and call with a clear description of where the sparking occurred.

The affected circuit or part of the installation may need to be isolated for safe inspection and testing. Tell us about alarms, refrigeration, medical equipment or other essential supplies.

Yes. Tell us who will provide access, which areas are occupied and whether tenants, staff or customers are present.

The cost depends on the fault, access, time on site, testing, parts and any repair agreed after assessment.

No. If the breaker or RCD trips again after being reset, leave it off and call for the fault to be assessed.

Arrange urgent electrical help

Call with the Fault Details

Include the postcode, affected area, warning signs and any access or power restrictions that could affect the call-out.

London coverage

Emergency Electrician Call-Outs Across London

We arrange emergency electrician call-outs across Central, West and North West London, including the areas listed below.

For a property outside these locations, send us the postcode and we will confirm availability.

Urgent electrical help in London

Request an Emergency Electrician Call-Out

Call 020 3488 2928 for urgent electrical help, or send the fault and property details through our contact page.