Electrical Installation & Maintenance in London
RCD Electrical carries out electrical installation and maintenance for homes, rental properties and commercial premises across London, including new installations, system checks and planned maintenance.
- New Electrical Installations
- System Checks & Maintenance
- London Appointments
Planned Electrical Work for Homes and Businesses
RCD Electrical installs, alters and maintains fixed electrical systems. The work is planned around the property, the existing installation and the agreed result.
- New installations and electrical alterations
- Maintenance and replacement work
- Clear scope before work begins
Service at a glance
Testing and certification requirements depend on the work included in the agreed scope.
What Electrical Installation and Maintenance Covers
The service covers planned installation, alteration, replacement and maintenance work for fixed electrical systems within the agreed scope.
01
New Electrical Work
New circuits, electrical points and fixed equipment can be installed where the property and planned use require them.
02
Changes and Replacements
Existing electrical components can be altered or replaced when layouts change or equipment becomes damaged or unsuitable.
03
Planned Maintenance
Reported problems and worn components can be assessed before repair or replacement work is agreed.
Electrical Work That May Be Included
The exact work depends on the property, the condition of the existing installation and what you need the electrical system to provide.
01
Circuits and Fixed Wiring
New or altered wiring for the electrical work included in the agreed scope.
02
Sockets and Switches
Installation, repositioning or replacement of fixed electrical accessories.
03
Lighting Points
New lighting points, controls and replacement fittings where included in the job.
04
Consumer Unit Connections
Connections and protective arrangements required for the circuits being installed or changed.
05
Dedicated Electrical Supplies
Separate supplies for fixed equipment where the installation and equipment requirements allow.
06
Additions and Alterations
Planned changes to existing electrical systems following an assessment of the current installation.
The Right Approach Depends on What Is Already There
A local problem may need electrical fault finding and repair. New circuits may require changes to the consumer unit or fuse box, while older or deteriorated wiring may need a separate electrical rewiring assessment.
Planned Maintenance for Existing Electrical Systems
Maintenance work starts with the reported issue, the affected part of the installation and the access available at the property.
Routine
Planned Checks
Arrange checks and maintenance around the property’s use and any known electrical concerns.
Faults
Reported Problems
Tripping circuits, failed accessories and intermittent issues can be assessed before repair work starts.
Damage
Worn Components
Damaged or deteriorated electrical accessories can be replaced where this forms part of the agreed work.
Changes
Updated Requirements
The installation can be reviewed when a room, property or fixed item is being used differently.
Scope note
Maintenance needs vary between properties. We confirm the reported issue, access and likely scope before arranging the work.
What Happens During an Installation or Maintenance Job
We confirm the requirements, assess the existing installation, complete the agreed work and explain the result before the job is closed.
01
Confirm the Requirements
We discuss the property, the electrical work needed and any access or timing restrictions.
02
Assess the Installation
We check the relevant circuits, existing equipment and any conditions that may affect the proposed work.
03
Complete the Agreed Work
The installation, alteration or maintenance work is carried out within the confirmed scope.
04
Test and Explain
Relevant testing is completed and we explain what was done, along with any further work identified.
Provide Clear Access to the Work Area
Good access helps the electrician assess the installation and complete the agreed work without avoidable delays.
- Keep the consumer unit and work area accessible
- Have previous reports or certificates available
- Tell occupants about possible power interruptions
- Identify essential or sensitive equipment in advance
- Building repairs, plastering or decorating
- Additional work outside the confirmed scope
- Specialist systems not listed in the quotation
- Further investigation not agreed in advance
Electrical Work for Different Types of Property
The scope is adjusted around the property, how it is used and the electrical work that needs to be completed.
Home
Houses and Flats
Planned additions, alterations, repairs and replacement work for domestic electrical systems.
Rent
Rental Properties
Electrical work can be arranged around access, occupants and the condition of the existing installation.
Work
Business Premises
Installation and maintenance can be planned around access to the affected areas and the way the premises operate.
Shared
Communal Areas
Shared lighting, electrical supplies and fixed equipment can be included where they form part of the agreed job.
Scope
The required work is confirmed before installation or maintenance begins.
Access
Occupied and working areas are considered when the appointment is arranged.
Completion
The completed work and any further recommendations are explained clearly.
We Assess the Problem Before Changing the Scope
If testing identifies a separate fault or wider deterioration, we explain the issue before quoting for additional work.
How Electrical Installation and Maintenance Is Quoted
The quotation is based on the work required, the existing installation, access, materials and any testing included in the job.
Quoted
For planned changes such as replacing, repositioning or adding electrical accessories.
Assessment may be required
Quoted
For new circuits or fixed supplies planned around the existing installation and connected equipment.
Assessment may be required
Quoted
For reported problems, damaged components or planned upgrades involving several points or circuits.
Assessment may be required
The quotation may change if concealed damage, additional faults, restricted access or work outside the original scope is identified. Any change is discussed before additional work begins.
Why Electrical Installation and Maintenance Matters
Fixed electrical systems need to suit the property, the equipment connected to them and the way each space is used. Planned work starts with the existing installation so additions, repairs and replacements can be scoped correctly.
New work and alterations
The Existing Installation Affects Every Addition
The Existing Installation Affects Every Addition
A new socket, lighting point, circuit or fixed supply has to work with the wiring and protective devices already in place. The route, load, access and condition of the installation all affect the final scope.
Available circuit capacity
The proposed work is assessed against the circuits and protection already serving the property.
Suitable wiring routes
Access and cable routes influence how the installation can be completed and what making-good may be needed.
Existing protective devices
New work may require changes where the current fuse box or consumer unit cannot support the agreed addition.
Where circuit protection needs to change, a separate fuse box or consumer unit assessment can confirm the work required.
Damage and deterioration
Worn Components Can Affect the Wider Installation
Worn Components Can Affect the Wider Installation
Loose connections, damaged accessories and deteriorated wiring can cause intermittent faults, heat or repeated tripping. Maintenance work should identify the affected part before replacement begins.
Damaged accessories
Cracked sockets, loose switches and worn fittings may need replacement rather than continued use.
Loose or overheated connections
Discolouration, buzzing or heat around an electrical point should be investigated before further work is planned.
Repeated circuit problems
Intermittent tripping or loss of power may indicate a fault that needs diagnosis before parts are changed.
When the cause is unclear, our electrical fault finding service can locate the problem before the repair scope is agreed.
Property use and new equipment
Electrical Requirements Change with the Property
Electrical Requirements Change with the Property
Renovations, room changes and new fixed equipment can alter where power is needed and how much demand is placed on the installation. Assessing these changes first avoids planning new work in isolation.
Changed room layouts
New layouts may require sockets, lighting controls or fixed supplies to be repositioned.
Additional fixed equipment
Equipment with a dedicated supply may need its own circuit, isolator or protective arrangement.
Several affected circuits
Wider changes may require a separate assessment before installation work can be quoted accurately.
If older wiring affects several circuits, an electrical rewiring assessment can establish whether targeted or wider replacement is needed.
Planning and ongoing maintenance
A Clear Scope Helps Control Access and Disruption
A Clear Scope Helps Control Access and Disruption
Homes, rental properties and business premises have different access needs. Confirming the work area, likely power interruptions and any sensitive equipment helps the appointment run more efficiently.
Defined work areas
The quotation can separate the agreed electrical work from decorating, building repairs or later additions.
Occupied properties
Access and short power interruptions can be discussed before work starts.
Further work identified
Separate faults or deterioration are explained before the original scope is changed.
Larger or phased projects can be coordinated through our electrical contractor service in London.
Confirm the Existing Condition Before Installation Begins
Send the property details, the electrical work required and any access restrictions. We will use that information to arrange the appropriate next step.
Details That Help Us Plan Your Electrical Work
A clear description of the work, the existing installation and access arrangements helps us confirm the right next step before an appointment is booked.
Describe the Work Required
Tell us what needs to be installed, altered, replaced or maintained, and what result you need from the electrical system.
Explain What Is Already Installed
Mention the consumer unit, known faults, previous alterations and any fixed equipment connected to the proposed work.
Confirm Access and Power Requirements
Let us know about occupied rooms, restricted areas, working hours or equipment that cannot be switched off without preparation.
Electrical Installation & Maintenance Questions
Direct answers about the work included, access, quotations, fault finding and what to provide before booking an appointment in London.
-
The required scope is confirmed before work begins
The existing installation, access, materials and testing requirements can affect the work needed and the quotation provided.
01 What does electrical installation and maintenance include?
It covers agreed work on fixed electrical systems, including new installations, alterations, replacement of electrical components and planned maintenance. The exact scope depends on the property and the existing installation.
02 Can new lighting points and controls be added?
New lighting points, controls and replacement fittings can be included in the agreed work. We first confirm the location, wiring route and condition of the circuit serving them.
03 What electrical maintenance work can be arranged?
Maintenance may include assessing reported problems and replacing damaged, worn or unsuitable electrical components within the agreed scope.
04 Is fault finding included in maintenance work?
Simple checks may form part of assessing the requested work. Intermittent tripping, unexplained power loss or a fault with an unclear cause may require a separate fault-finding appointment.
05 What access is needed for the appointment?
Access is normally needed to the consumer unit, the affected electrical points and the areas where wiring or fixed equipment will be installed or maintained.
06 Does this service include electrical rewiring?
Small additions and alterations may be included. Widespread deterioration or replacement of several circuits may require a separate electrical rewiring assessment.
07 What details should I provide before booking?
Provide the property postcode, a clear description of the work, details of known faults, access restrictions and information about equipment that may need a dedicated supply.
08 Can you install or move sockets and switches?
Yes, sockets and switches can be installed, repositioned or replaced where the existing wiring, circuit protection, cable route and access allow the proposed work.
09 Can you install a dedicated electrical circuit?
A dedicated circuit may be installed for fixed equipment where the equipment requirements, consumer unit, circuit protection and proposed cable route are suitable.
10 How do you decide between repair and replacement?
The affected component, wiring condition and cause of the problem are assessed first. We then explain whether a targeted repair, replacement or wider investigation is appropriate.
11 Will the electricity need to be switched off?
Some installation, maintenance and testing work requires circuits or equipment to be isolated. Tell us about alarms, computers or essential equipment that may need preparation before power is interrupted.
12 Can work be planned for an occupied property?
Yes. Tell us which rooms are occupied, any access restrictions and suitable working times so the appointment can be planned around the property.
13 How is electrical installation and maintenance quoted?
The quotation is based on the agreed work, the existing installation, access, materials and any testing included. An assessment may be needed before the final scope is confirmed.
14 What should I do if the electrical problem is urgent?
Sparking, a burning smell, hot electrical points, repeated tripping or sudden power loss should be reported as an urgent fault rather than booked as routine maintenance.
Send the Property Details Before Booking
Include the postcode, the work required and any access or power restrictions that could affect the appointment.
Electrical Services Connected to Installation and Maintenance Work
The right service depends on the condition of the existing installation, the problem reported and the electrical work planned for the property.
Electrical Installation and Maintenance Across London
We arrange electrical installation and maintenance appointments across Central, West and North West London, including the areas listed below.
- Fulham
- Hammersmith
- Chelsea
- Kensington
- Holland Park
- Putney
- Battersea
- Westminster
- Central London
- West London
- Blackfriars
- Golders Green
- Finchley
- Hendon
- Hampstead
- West Hampstead
Book an Electrical Installation or Maintenance Appointment
Book online, call us or send the property details through our contact page.