Air Conditioning Services in London

Air Conditioning Services in London

RCD Electrical provides air conditioning installation, repair and maintenance for homes, rental properties and commercial premises across London, with each job planned around the system and property.

Air conditioning services in London

Heating and Cooling Planned for UK Homes and Workplaces

RCD Electrical plans air conditioning around the room, heat gain, occupancy, outdoor-unit position and available electrical supply. The aim is a system that provides useful cooling and, where selected, efficient room heating without unnecessary capacity or electrical load.

Service at a glance

Systems
Wall-mounted, multi-split and selected commercial options
Suitable for
Bedrooms, living rooms, offices, shops and multi-room properties
Before work
Capacity, placement, drainage, pipework and electrical load are checked
Final equipment, refrigerant work and electrical certification depend on the agreed design and installation scope.
01 · Service overview

What an Air Conditioning Installation Can Include

The right arrangement depends on how many rooms need conditioning, how the property retains heat and where indoor and outdoor equipment can be positioned.

01

Single-Room Split Systems

One indoor unit connected to one outdoor unit. This is often suitable for a bedroom, living room, home office or garden room.

02

Multi-Split Systems

Several indoor units can share one outdoor unit, allowing separate room control where outside space is limited.

03

Commercial and Concealed Options

Cassette, ducted or larger systems may suit offices, shops and shared spaces after the cooling load and access have been assessed.

Good cooling starts with the building, not the catalogue. Shading, ventilation, glazing and room use should be considered before capacity is selected. If the proposed supply reveals tripping, heat damage or an unsafe circuit, arrange electrical fault finding before installation.
02 · Current UK system options

Well-Known Air Conditioning Ranges Used in UK Properties

These are examples of current UK ranges rather than a fixed recommendation. The suitable output and model are confirmed after the room, installation route and electrical supply have been assessed.

01

Daikin Perfera

A premium wall-mounted range for bedrooms, living spaces and home offices where heating, cooling, quieter operation and air treatment are priorities.

02

Daikin Sensira

A compact wall-mounted option for straightforward single-room installations where a discreet unit and controlled running costs matter.

03

Mitsubishi Electric MSZ-AY

A modern R32 inverter range suited to domestic rooms and smaller workplaces, with scheduling and connected controls available within the range.

04

Panasonic TZ Super-Compact

A useful choice where wall space is restricted, including positions above doors, smaller bedrooms, studies and compact garden rooms.

05

Toshiba SEIYA S4

A quiet wall-mounted range that can suit bedrooms, consulting rooms and offices where low indoor noise is an important design point.

06

Toshiba HAORI and Multi-Split Options

HAORI suits design-led interiors, while multi-split arrangements can serve several rooms where one external unit is preferred.

Brand is only one part of the decision

Capacity and Positioning Matter More Than the Name on the Unit

The survey considers room size, glazing, insulation, occupancy, solar gain and pipe routes. A larger system is not automatically cheaper to run, and an undersized unit may operate continuously. The fixed supply may also require a consumer unit assessment, a dedicated circuit through our electrical contractor service, or wiring improvements before the equipment is connected.
03 · Efficiency and installation safety

How Correct Design Reduces Running Cost and Electrical Risk

An air conditioner should be sized for the actual room load and connected to an electrical supply designed for the manufacturer’s current and protection requirements.

Size

Match Output to Heat Gain

Room volume, glazing, orientation, insulation, occupancy and equipment loads affect the required heating and cooling capacity.

Control

Condition Only the Rooms in Use

Inverter operation, zoning, timers and sensible set temperatures can reduce unnecessary compressor run time.

Power

Design the Fixed Electrical Supply

Cable size and protective devices are selected from the equipment data, route, installation method, voltage drop and fault protection requirements.

F-Gas

Use Qualified Refrigerant Engineers

Refrigerant pipework, charging, recovery and leak-related work must be handled by people and businesses holding the required F-Gas credentials.

Electrical design note

The unit’s nominal kW output does not by itself determine cable or breaker size. The manufacturer’s electrical data, maximum current, starting characteristics and local installation conditions must all be checked.

04 · From consultation to handover

How an Air Conditioning Installation Is Planned

The process starts with the rooms and ends with tested controls, a commissioned system and a clear explanation of how to use it efficiently.

01

Consultation and Site Survey

We discuss the rooms, comfort problem, preferred controls, indoor-unit positions, outdoor access and any planning or freeholder restrictions.

02

System and Electrical Design

The cooling load, unit capacity, pipe route, condensate route, isolator position and available circuit capacity are reviewed.

03

Quotation and Installation

The agreed equipment, electrical work, refrigerant pipework, drainage and mounting arrangements are installed within the confirmed scope.

04

Testing, Commissioning and Handover

The electrical supply and system operation are tested, controls are set up and maintenance requirements are explained.

Before the survey

Prepare the Information That Affects the Design

Basic room and access details help narrow down the right system before the final equipment is selected.

Existing electrical issues should be identified before equipment is connected. Repeated tripping may need fault diagnosis, limited consumer-unit capacity may require a fuse box or consumer unit review, and larger projects can be coordinated through our electrical contractor service.
Work Not Included Unless Agreed
05 · Suitable rooms and properties

Where Fixed Air Conditioning Can Work Well

The best results come from rooms with a clear comfort problem, suitable airflow and a practical route to an outdoor unit, drainage point and electrical supply.

Sleep

Bedrooms and Loft Rooms

Quiet wall-mounted systems can help rooms that remain hot overnight, especially upper floors and converted loft spaces.

Live

Living Rooms and Garden Rooms

Rooms with large glazing or direct sun may benefit from properly calculated cooling and optional room heating.

Work

Offices, Shops and Consulting Rooms

Comfort can be planned around occupancy, equipment heat, working hours, noise limits and customer-facing areas.

Multi

Multi-Room Homes and Rental Properties

Multi-split systems can provide separate room control while reducing the number of outdoor units, subject to capacity and pipe routes.

Capacity

Each room is assessed rather than choosing output from floor area alone.

Placement

Airflow, noise, servicing access, drainage and outside appearance are considered.

Control

Independent zones and schedules help avoid cooling unused rooms.

If the electrical supply is unsuitable

We Confirm the Required Upgrade Before the AC Is Connected

An overloaded circuit, damaged wiring or inadequate protection should not be hidden behind a new air conditioning installation.
06 · Installation costs and quotations

What Affects the Cost of Air Conditioning Installation

There is no useful fixed price without checking the rooms and installation route. Equipment, capacity, number of indoor units, electrical work, access and pipe length all affect the quotation.

The survey defines the real scope Send the postcode, room details and preferred number of units so the appropriate assessment can be arranged.
Single-Room Split System

Quoted

For one indoor unit and one outdoor unit serving a bedroom, living room, office or garden room.

Capacity, wall type, pipe route, drainage, outdoor access and electrical supply affect the quote.

Site assessment may be required

Multi-Split Air Conditioning

Quoted

For several independently controlled rooms connected to one suitably sized outdoor unit.

The number of rooms, combined load, pipe lengths, access and outdoor-unit position shape the final design.

Detailed design is normally required

Commercial or Concealed Systems

Quoted

For offices, shops, cassettes, ducted units or projects involving several areas and coordinated electrical work.

Ceiling access, controls, drainage, distribution, power supply and working-hour restrictions affect the scope.

Survey and design are required

Running cost also varies with the electricity tariff, set temperature, weather, insulation, maintenance and hours of use. The lowest purchase price does not necessarily provide the lowest whole-life cost.

07 · Comfort, efficiency and legal standards

Why Air Conditioning Can Add Value in UK Properties

UK buildings are often designed to retain heat, which can make upper floors, glazed rooms and compact offices uncomfortable during warm periods. A correctly designed air-to-air system can provide controlled cooling and useful room heating without conditioning the whole property.

Shading, blinds, night ventilation and reducing internal heat gains should be considered first. Air conditioning then provides controlled cooling for rooms that still overheat or cannot be ventilated safely or quietly.

Bedrooms and lofts

Upper floors can retain heat after outdoor temperatures fall, affecting sleep and overnight comfort.

Glazed rooms

Large windows and afternoon sun can create a higher cooling load than room size alone suggests.

Busy workplaces

People, lighting and equipment add internal heat even when outdoor conditions are moderate.

The Met Office records the UK’s warming trend, while Approved Document O explains the government approach to reducing overheating in new residential buildings.

Efficient operation depends on matching output to the room, allowing clear airflow and using controls sensibly. More capacity does not automatically mean faster, cheaper or more comfortable cooling.

Correct heat-load calculation

Capacity should reflect glazing, insulation, orientation, occupancy and equipment rather than floor area alone.

Good indoor-unit position

Air should circulate across the occupied zone without blowing directly onto beds, desks or seating.

Zoning and sensible controls

Condition occupied rooms, use schedules and avoid extreme set temperatures that keep the compressor working unnecessarily.

Older or restricted circuits may need investigation before the supply can be designed, while limited protection may require a consumer unit assessment.

Cable size, breaker or RCBO rating, isolation, earthing and fault protection are selected after checking the manufacturer’s electrical data and the existing installation. Guessing from the unit’s cooling capacity can leave the circuit under-protected or overloaded.

Dedicated supply where required

A fixed circuit avoids relying on extension leads or an unsuitable socket circuit for permanent equipment.

Correct protection and isolation

The protective device and local isolator must suit the equipment, cable and disconnection requirements.

Inspection, testing and certification

Completed electrical work should be tested and the appropriate certificate or building-control route provided.

Electrical work in dwellings must follow Approved Document P. NICEIC is one recognised competent-person route, while other authorised schemes and building-control routes may also apply.

An installer who can mount equipment is not automatically qualified to open, charge or recover a refrigerant circuit. Using unqualified people can leave leaks, poor commissioning, warranty problems and incomplete records.

Qualified individual

The person carrying out regulated F-Gas work must hold the appropriate personal qualification.

Certified business

The company carrying out installation or servicing for others may also need approved company certification.

Systems above 12kW

Combined systems over the legal threshold may require regular energy inspections by an accredited assessor.

Government guidance explains F-Gas qualification duties and air conditioning inspections for systems over 12kW.
Plan comfort without creating a new electrical problem

Size the System and Design the Supply Before Installation

Send the room details, postcode and preferred unit locations. We will use that information to arrange the correct survey and confirm the electrical and F-Gas scope.
Before you book

Details That Help Us Design Your Air Conditioning

A useful enquiry explains the rooms, the comfort problem and the practical installation limits. This helps us decide whether a single-split, multi-split or wider commercial assessment is appropriate.

Describe Each Room

Provide approximate dimensions, ceiling height, use, occupancy, glazing and when the room becomes uncomfortable.

Show Possible Unit Positions

Send photos of suitable indoor walls, external areas, drainage options and any route between the proposed units.

Mention Electrical and Property Restrictions

Include the consumer-unit location, known electrical issues, lease or freeholder rules, listed status and restricted working hours.

RCD Electrical LTD -006
Air conditioning guidance

Air Conditioning Installation Questions

Direct answers about system types, model selection, electricity use, F-Gas, circuit safety, quotations and planning an installation in London.

A single-split system often suits one bedroom, living room or office. Multi-split systems can serve several rooms from one outdoor unit. The choice depends on heat gain, outside space, pipe routes and electrical capacity.

Current UK ranges include Daikin Perfera and Sensira, Mitsubishi Electric MSZ-AY, Panasonic TZ Super-Compact and Toshiba SEIYA or HAORI. Availability and suitability should be confirmed after a survey.

A single-split uses one indoor and one outdoor unit. A multi-split connects several indoor units to one outdoor unit and allows individual room control, subject to combined capacity and pipe-length limits.

Many fixed split systems are air-to-air heat pumps and can provide room heating as well as cooling. Their value depends on the building, electricity tariff, outdoor conditions and how the room is used.

Room dimensions are only the starting point. Glazing, orientation, insulation, occupancy, appliances, ceiling height and ventilation all affect the heating and cooling load.

The process normally includes a room and site survey, system and electrical design, quotation, installation, electrical testing, refrigerant commissioning and a handover explaining controls and maintenance.

Cost is affected by the model, output, number of rooms, pipe length, drainage, wall construction, outdoor access, electrical work, controls and whether specialist access or making-good is required.

Use a correctly sized inverter system, condition occupied rooms only, keep filters clean, use schedules, close doors and windows while running, reduce solar gain and avoid setting an unnecessarily low temperature.

Many fixed systems require a dedicated circuit and local isolation, but the final design must follow the manufacturer’s electrical data and the condition and capacity of the existing installation.

The electrician checks maximum current, cable length, installation method, grouping, ambient temperature, voltage drop, earthing and protective-device requirements. The circuit is then inspected and tested before handover.

Anyone carrying out regulated work on equipment containing F-Gas must hold the appropriate personal qualification. Businesses installing or servicing systems for others may also require company certification.

NICEIC is one recognised Competent Person Scheme, but it is not the only authorised scheme. The important point is that the electrical work is completed by a competent person, complies with Part P where applicable and follows the correct certification or building-control route.

Some domestic installations may fall within permitted development, but rules depend on function, size, position, noise, property type and location. Listed buildings, conservation areas, flats and leasehold properties need particular checks before work starts.

Routine servicing should follow the manufacturer’s guidance and level of use. In England and Wales, systems with a combined effective rated output above 12kW require an energy inspection by an accredited assessor at intervals no greater than five years.

Plan your air conditioning service

Send the Room Details Before Booking

Include the postcode, room sizes, photos, preferred unit positions and any known electrical, lease or access restrictions.
London coverage

Air Conditioning Services Across London

We arrange air conditioning assessments and installation planning across Central, West and North West London, including the areas listed below.

For a property outside these locations, send us the postcode and we will confirm whether an assessment can be arranged.
Air conditioning services in London

Book an Air Conditioning Assessment

Book online, call us or send the room and property details through our contact page.