Fire Alarm Installation, Testing & Maintenance

Fire Alarm Services in London

RCD Electrical provides fire alarm installation, testing and maintenance for homes, shared buildings and commercial premises across London. The work is planned around the property, the existing system and the agreed service scope.

Fire alarm services in London

Fire Alarm Systems for Homes and Businesses

RCD Electrical installs, tests and maintains fire detection and alarm systems for homes, shared buildings and commercial premises. The scope is based on the property, the existing system and the agreed requirements.

Fire alarm service at a glance

Work covers
Detection, warning, call points and controls
Suitable for

Homes, rental properties, shared buildings and workplaces

Before work

System type, coverage, access and existing condition are confirmed

The appropriate system type and category depend on the property, its use, the fire risk assessment and the agreed design.
01 · Fire alarm overview

What Fire Alarm Services Can Include

The service covers agreed work on fire detection and alarm systems, including new installations, additions, alterations, testing, planned maintenance and fault assessment.

01

New Fire Alarm Systems

A new system can be planned around the building use, required coverage, occupancy and agreed fire safety information.

02

Alterations and Upgrades

Detectors, call points, sounders, panels and related equipment can be altered or replaced where this forms part of the agreed work.

03

Testing and Maintenance

Existing systems can be tested and maintained, with faults and recommended work explained before repairs are agreed.

This page covers planned fire alarm work. A suspected fire or active alarm is not a routine service request. Follow the building’s emergency procedure. Burning smells, damaged wiring or loss of power to the system should be reported to an emergency electrician in London.
02 · Fire alarm installation

What a Fire Alarm Installation May Include

The installation scope depends on the property, its use, the existing system, the required coverage and the agreed fire alarm specification.

01

Control Panels and Zones

Control and indicating equipment arranged around the agreed system design and building layout.

02

Smoke and Heat Detection

Detector types and positions selected for the areas included in the agreed installation scope.

03

Manual Call Points

Manual alarm points installed where required by the agreed design and building use.

04

Sounders and Visual Alarms

Audible and visual warning devices included where required by the system specification.

05

Power Supplies and Interfaces

Mains supplies, standby power and agreed interfaces with other building systems.

06

Commissioning and Records

Testing, commissioning information and agreed system records provided for the completed work.

The building and fire strategy affect the work

The System Must Match the Property and Its Use

A local problem may need electrical fault finding and repair. New circuits may require changes to the consumer unit or fuse box, while older or deteriorated wiring may need a separate electrical rewiring assessment.

03 · Testing and maintenance

Testing and Maintenance for Existing Fire Alarm Systems

The visit is planned around the installed system, available records, reported faults, building access and the areas included in the agreed scope.

Routine

Scheduled Testing

System tests can be arranged around the building’s use, occupancy and agreed maintenance schedule.

Devices

Detector and Call Point Checks

Accessible detectors, call points, sounders and indicators can be checked within the agreed service scope.

Power

Mains and Standby Supplies

The condition of relevant power supplies and standby batteries can be checked during the planned visit.

Records

Faults and Service Records

Reported faults, work completed and further recommendations can be recorded and explained.

Standards note

Non-domestic systems are commonly planned and maintained with reference to BS 5839-1:2025. Domestic systems use BS 5839-6:2019+A1:2020. The applicable scope depends on the premises and system.

04 · How the service is arranged

What Happens During Fire Alarm Work

We confirm the property and system details, assess the existing installation where relevant, complete the agreed work and explain the result.

01

Confirm the Property and Requirements

We discuss the building use, system type, available fire safety information, access and any timing restrictions.

02

Assess the Existing System

We check the accessible panel, devices, circuits, records and conditions that may affect the agreed work.

03

Complete the Agreed Service

Installation, alteration, testing, maintenance or fault assessment is completed within the confirmed scope.

04

Test, Record and Explain

Relevant testing is completed and we explain the result, recorded faults and any further work identified.

Before the appointment

Provide Access to the System

Clear access helps us inspect the system and complete the agreed work without avoidable delays.

Tell us about linked building systems before the appointment. The fire alarm may interface with door release equipment or ventilation controls, and these interfaces may need separate assessment. Emergency lighting should be included separately where it forms part of the wider fire safety work.
Not Included Unless Agreed
05 · Property types

Fire Alarm Systems for Different Types of Property

The appropriate system, coverage and maintenance arrangements depend on the property, its use, occupancy and fire safety requirements.

01

Houses and Flats

Domestic smoke and heat alarm work planned around the home, occupants and agreed coverage.

02

Rental Properties and HMOs

The required grade and coverage depend on the property, occupancy, licensing conditions and relevant fire safety information.

03

Commercial Premises

The responsible person and fire risk assessment help define the appropriate means of detection and warning.

04

Blocks and Communal Areas

Common-area systems can be planned around the building layout, evacuation approach and agreed fire safety requirements.

Assessment

Building use, risk information and existing system details are reviewed before the scope is agreed.

Access

Occupied rooms, communal areas and working hours are considered when arranging the visit.

Records

Completed work, test results, faults and recommendations are explained clearly.

If the existing system has a fault

We Assess the Fault Before Changing the Scope

If testing identifies damaged devices, wiring faults or wider system issues, we explain the problem before additional work is quoted.
06 · Fire alarm quotations

How Fire Alarm Work Is Quoted

The quotation is based on the property, system type, required coverage, existing equipment, access, interfaces and testing included in the agreed scope.

The system requirements are confirmed first Send the property details, existing system information and the work required so the next step can be arranged.
New Fire Alarm Installation

Quoted

For a new domestic, communal or commercial fire detection and alarm system.

The property, required coverage, system category, wiring routes and interfaces affect the scope.

Assessment may be required

Alterations and Upgrades

Quoted

For additions, detector changes, panel work, extensions or alterations to an existing system.

Existing compatibility, records, access and the reason for the change affect the quotation.

Assessment may be required

Testing, Maintenance and Repairs

Quoted

For planned testing, maintenance visits, fault assessment and agreed repairs.

The system size, device count, faults, access and replacement parts affect the final scope.

Assessment may be required

The quotation may change if concealed wiring faults, incompatible equipment, additional devices, restricted access or work outside the original scope is identified. Any change is discussed before additional work begins.

07 · Why the system matters

Why Fire Alarm Design and Maintenance Matter

A fire alarm system must provide appropriate detection and warning for the building, its occupants and the fire safety arrangements. The correct system depends on the premises and agreed risk information.

The alarm must be capable of alerting people in the areas covered by the agreed design. Building layout, background noise, sleeping risk and occupancy can affect the specification.

Detector coverage

Detector type and coverage are selected for the rooms and risks included in the agreed design.

Audible and visual warning

Sounders and visual alarm devices may be needed to provide suitable warning in different parts of the building.

Manual alarm points

Manual call points may form part of the agreed means for occupants to raise the alarm.

Where circuit protection needs to change, a separate fuse box or consumer unit assessment can confirm the work required.

Contamination, damaged devices, weak batteries, wiring faults or disabled zones can affect how the system responds. Planned testing helps identify problems before further work is agreed.

Detector condition

Detectors can be affected by damage, contamination, building work or changes to room use.

Power and batteries

Mains and standby supplies need to remain suitable for the installed alarm system.

Fault indications

Panel faults, disabled devices and repeated false alarms should be investigated rather than ignored.

Where the issue involves wiring or power rather than alarm equipment, our electrical fault finding service can help identify the electrical cause before repair work is agreed.

Domestic and non-domestic premises use different standards and system classifications. The appropriate category or grade depends on the property, occupancy, purpose and fire safety information.

Non-domestic premises

BS 5839-1:2025 covers design, installation, commissioning and maintenance for non-domestic systems.

Domestic premises

BS 5839-6:2019+A1:2020 covers fire detection and alarm systems in domestic premises.

Risk-based scope

The fire risk assessment or design brief may define the required coverage and system category.

Where a project includes several electrical and fire safety systems, an electrical contractor service can help coordinate the agreed work.

Homes, rental properties, shared buildings and workplaces have different access needs. Confirming the work area, likely power interruptions and any sensitive equipment helps the appointment run more efficiently.

Fire risk assessment

For non-domestic premises, the fire risk assessment informs the required detection and warning arrangements.

System records

Zone information, service records and commissioning documents support future testing and fault investigation.

Building changes

Alterations to layout, occupancy or building use may affect the existing fire alarm coverage.

Wider electrical and safety works can be coordinated through our electrical contractor service in London.
Plan the system around the building

Confirm the Fire Alarm Requirements Before Work Begins

Send the property details, existing system information, fire risk assessment or design brief where available, and any access restrictions.
Before you book

Details That Help Us Plan Your Fire Alarm Service

A few property and system details help us understand the likely scope before an appointment or assessment is arranged.

Property and Building Use

Tell us whether the property is a home, rental property, HMO, block, office, shop or other commercial premises.

Existing Fire Alarm System

Mention the panel make, system type, device count, known faults, recent alterations and available service records.

Access and Fire Safety Information

Provide access details and share the fire risk assessment, zone plan or design information where available.

RCD Electrical LTD -012
RCD Electrical fire alarm guidance

Fire Alarm Service Questions

Answers about installation, system types, testing, maintenance, standards, quotations and what to provide before booking.

The service can include new fire alarm installation, additions, alterations, detector or call point changes, system testing, planned maintenance, fault assessment and agreed repairs. The exact scope depends on the property and system.

The category or grade cannot be selected from property size alone. It depends on the building use, occupancy, fire risk assessment, evacuation approach and purpose of the system.

Existing systems can be assessed for additions, alterations or replacement equipment. Compatibility, device capacity, wiring, records and the reason for the change affect what can be included.

Testing and planned maintenance can be arranged for existing systems. The visit may include accessible device checks, panel indications, power supplies, standby batteries, fault records and agreed functional tests.

We review the available system information, inspect accessible equipment, complete the agreed tests, record faults and explain any repair, replacement or further investigation recommended.

This page covers electrical work on fire detection and alarm systems. A fire risk assessment or fire strategy is separate unless it is specifically included in the agreed service scope.

Provide the postcode, property type, building use, existing panel or alarm type, known faults, approximate device count, access restrictions and any fire risk assessment, zone plan or service records available.

BS 5839-1:2025 applies to fire detection and alarm systems in non-domestic premises. BS 5839-6:2019+A1:2020 applies to domestic premises. The correct scope depends on the building and agreed fire safety requirements.

Yes, a new system can be installed within an agreed design and service scope. We need the property details, required coverage, access information and any fire risk assessment or design brief available.

Depending on the agreed design, the work may include control equipment, smoke or heat detectors, manual call points, sounders, visual alarm devices, standby power and agreed interfaces.

The maintenance schedule depends on the premises, system, applicable standard, manufacturer information and fire safety arrangements. We confirm the agreed service scope before the appointment.

Yes. Tell us about occupants, working hours, restricted areas and any planned alarm tests so access and disruption can be managed before the visit.

Testing identifies the system condition and reported faults. Replacement parts, repairs, additional devices and wider alterations are agreed and quoted separately where required.

An active alarm or suspected fire is not a routine service request. Follow the building’s emergency procedure and contact the emergency services where fire is suspected. Report system faults separately once the immediate situation is safe.

Arrange fire alarm work

Send the Property and System Details

Include the postcode, property use, existing system, known faults and any fire risk assessment or zone plan available.
London coverage

Fire Alarm Services Across London

We arrange fire alarm installation, testing and maintenance across Central, West and North West London, including the areas listed below.

For a property outside these locations, send us the postcode and we will confirm availability.
Arrange fire alarm services in London

Book a Fire Alarm Service Appointment

Book online, call us or send the property details through our contact page.